K T TECH KT-3128/3098BT/ KT-3128/3098BTU DIGITAL DUAL ALARM FM CLOCK RADIO I NST RU CT I ON M ANUAL FUNCTION SNOOZE/DIMMER/SLEEP/SCAN Thank you for buying Brandname’s product. Read this manual carefully to get the best performance form this unit.
IMPO R TAN T · · · · Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. · Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. · Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.
waste. Please recycle where facilities exist. Check with your Local Authority of retailer for recycling device. (Batteries pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. LO C AT IO N O F C O N T R O L 3 2 4 5 VOLUME TUNING MEMORY 6 1 AL1 TIME SET AL2 FUNCTION SNOOZE/DIMMER/SLEEP/SCAN 7 8. PM INDICATOR 9. AL1 INDICATOR 10. AL2 INDICATOR 11. Bluetooth 12. DIGIT DISPLAY 9 1. /FUNCTION 2. MEMORY / /TIME SET 3. TUNING DOWN 4. TUNING UP 5.
C O N N E C T PO WE R CAUTION · Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. · Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. B OT TO M O F S E T Battery compartment for 1.5 volt (LR6, UM-3, AA) battery 2pcs. (not included) for temporary time storage. S E T T IM E 1. Press and hold TIME SET for two seconds. [0:00] Hour digit is blink. 2.
S TO R E FM R AD IO S TAT IO N S You can store up to 20 FM radio stations in preset channel automatically or manually. STORE FM RADIO STATIONS AUTOMATICALLY (AUTO SCAN) 1. Press / FUNCTION to turn on FM radio. 2. Press SNOOZE/DIMMER/SLEEP/SCAN multi-function button and hold for 2 seconds. The received stations are automatically stored to preset numbers. STORE FM RADIO STATIONS MANUALLY. 1. Tune to an FM radio station. 2. Press MEMORY to activate the storing mode. 3.
connecting. 8. Playback music or multi-media audio source at the devices / smartphone. 9. Press Volume + / - or adjust volume level at the devices / smartphone to desire level. 10. Press Backward skip to select previous song. 11. Press Forward skip to select next song. 12. Press Play/Pause to play or pause the song is being played back. Note The digit display returns to clock display if no buttons is pressed for 10 seconds. S E T ALAR M T IM E R Make sure that you have set the clock correctly.
S N O O Z E ALAR M When alarm sounds, press SNOOZE to activate the snooze time 9 minutes. The AL1 / AL2 indicator keeps blinking. S E T S LE E P T IM E R 1. Press / Functon to radio mode. 2. Press SNOOZE/DIMMER/SLEEP multi-function button repeatedly to select the sleep timer period (in minutes). To deactivate the nap timer, press SNOOZE/DIMMER/SLEEP multi-function button repeatedly until back to radio frequency.
mains supply but there is now the advantage that your clock will continue to work. The clock display will not light up, as the clock time will be held in the memory. This also enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant to be used from short temporary power interruption. For longer durations, the battery may become exhausted or there may be some deviation in accuracy.
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
