User's Manual

1. Tune to an FM radio station.
2. Press MEMORY and hold to activate the storing mode.
3. Press TUNING +/- to select the preset number.
 [P 01 ~ P 20] is preset station numbers.
 If this position is occupied, the previous stored frequency will be displayed .
 To remove a pre-stored FM radio station, store another station in its place.
Press MEMORY to select a preset number.
Note
The digit display return to clock display if no buttons is pressed for 5 seconds
STORE FM RADIO STATIONS MANUALLY
LISTEN TO A PRESET FM RADIO STATION
LISTEN TO BLUETOOTH WIRELESS MUSIC STREAMING
SET ALARM TIMER
1. Press / FUNCTION to Bluetooth mode.
2. [bt] displays on the screen.
3. Bluetooth indicator flash to wait for Bluetooth enabled device / smartphone to pair
with it.
4. Turn on Bluetooth function at Bluetooth enable device / smartphone.
5. Scan KT-3268BT as device name.
6. Select KT-3268BT on device name list.
7. Bluetooth indicator flash slowly after pairing and connecting
Make sure that you have set the clock correctly.
You can set two separate alarm timers. For the alarm sound, you can select the radio
or the buzzer.
1. Press / FUNCTION to Clock mode.
2. Press and hold AL1/AL2 for two seconds.
[0:00] Hour digit is blink.
3. Press HOUR to set the alarm hour and MINUTE to set the alarm minute.
4. Press AL1/AL2 again to select a sound source: RADIO or BUZZER.
The Radio indicator is blink if radio source is selected and AL1 / AL2 indicator is
light up.
The buzzed indicator is blink if the buzzer sound is selected and AL1 / AL2
indicator is light up.
5. Press Time Set to confirm the ALARM TIMER
6. Turn off the alarm.
Press AL1/AL2 for two seconds and see the time is blink.
Press AL1/AL2 for twice until the AL1/AL2 indicator is gone .
Press Time Set to back clock .
3