User's Manual

90 > 80 > 70 > 60 > 50 >40 >30 >20 > 10
OFF
SNOOZE ALARM
SET SLEEP TIMER
4
SET ALARM TIMER
8. Playback music or multi-media audio source on the device/ smartphone.
9. Press Volume + / - or adjust volume level on the device/ smartphone to desired level.
10. Press skip to select previous song.
11. Press skip to select next song.
12. Press to play or pause the song that is being played back.
Note
The digit display returns to clock display if no button is pressed for 10 seconds.
This clock radio can switch to standby mode automatically after a preset period.
1. Press / FUNCTION to radio mode.
2. Press SNOOZE/DIMMER/SLEEP/SCAN multi-function button repeatedly for 2
seconds to select the sleep timer period (in minutes).
To deactivate the sleep timer, press SNOOZE/DIMMER/SLEEP/SCAN multi-function
button repeatedly until back to radio frequency.
Sleep Timer period circle as follow :
1. Press / FUNCTION to Bluetooth mode.
2. [bt] displays on the screen.
3. Bluetooth indicator flash to wait for Bluetooth enabled device / smartphone to pair
with it.
4. Turn on Bluetooth function at Bluetooth enable device / smartphone.
5. Scan KT-3268BT as device name.
6. Select KT-3268BT on device name list.
7. Bluetooth indicator flash slowly after pairing and connecting
You can set two separate alarm timers. For the alarm sound, you can select the radio
or the buzzer.
1. Press / FUNCTION to Clock mode.
2. Press and hold AL1/AL2 for two seconds. [0:00] Hour digit is blink.
3. Press TUNING +/- to set the alarm hour.
4. Press AL1/AL2 again to set minute.
5. Press TUNING+/- to set the alarm minute.
6. Press AL1/AL2 again to select a sound source and then press TUNING +/- to
select a sound source: RADIO or BUZZER.
The [rAd] is blink if radio source is selected and AL1 / AL2 indicator is
light up.
The [bu2] is blink if the buzzer sound is selected and AL1 / AL2
indicator is light up.
Press AL1/AL2 again to set alarm volume level.
Press TUNING +/- to adjust desire alarm volume level
Press AL1/AL2 to off alarm function and AL1/AL2 indicator is off.
When alarm sounds,press SNOOZE to activate the snooze time 9 minutes.
The AL1/AL2 indicator keeps blinking.