User's Manual

REAR PANEL
1 Antenna Socket
The 50-ohm coaxial feed line to the antenna must be connected here, using a Type-M
(PL-259) plug.
2 13.8V DC Cable Pigtail with connector
The supplied DC power cable must be connected to this 2-contact. Use only the supplied
fused cable, extended if necessary, for power connection.
3 External Speaker Jack
An external loudspeaker may be connected to this 2-contact, 3.5mm mini-phone jack
Caution: Do not connect either wire of this line to ground, and be certain that the speaker has
adequate capability to handle the audio output (4W) from the radio.
4 D-Sub 15-Pin Accessory Connector
External TX audio line input, PTT (Push To Talk), and external RX audio Line output
signals may be obtained from this connector for use with accessories such as data
transmission.