User manual

Active Optical Cable (AOC)
is a cabling technology that
accepts same electrical inputs
as a traditional copper cable,
but uses optical fiber between
the connectors to extend HDMI
signals with zero loss or latency.
The KanexPro AOC 30 meter
(98 feet) HDMI 2.0 cables with
Ethernet are designed with
premium craftsmanship to deliver
UltraHD with a super bandwidth
of 18 Gbps.
These latest specs from HDMI
deliver uncompressed 4K
resolutions with 32 audio
channels for a multi- dimensional
immersive audio and up to 1536
kHz sample frequency to attain
highest audio fidelity. It supports
sub-sampling rates of 4:4:4,
4:2:2 & 4:2:0 YUV with deep
color and HDR can be achieved
when integrated with compatible
HDMI 2.0 devices. This AOC
cable is resistant to EMI and RFI
interference providing you with
noise-free video and audio with
less copper and more fiber optic.
The cable gets its power via USB
which can be connected near the
display or to a flat-panel which
uses USB port to get its power.
18G HDMI
®
Active Optical
Cable with 4K/60Hz - 50m
HDMI AOC w/18 Gbps bandwidth
& 4:4:4 Sampling
MPN: CBL-AOC50M4K
FEATURES
• HDMI® AOC- Active optical cable
• Premium video quality up to
4096x2160p/50Hz or 60Hz
• Bandwidth up to 18Gbps (6Gbps per channel)
• Color Sub-sampling of 4:4:4, 4:2:2, 4:2:0 with
Deep Color & HDR
• Integrated USB connector draws power from
the display
• EMI/RF free for clear signal transmission
• Up to 32 audio channels for a multi-
dimensional immersive audio
• Up to 1536kHz audio sample frequency for the
highest audio fidelity
• Support for the wide angle theatrical 21:9 video
aspect ratio
• Dynamic synchronization of video and audio
streams
• Supports CEC extensions
• Low power consumption
• Supports 3D and 4Kx2K
• Support color depths to 48 bits
• HDCP compliant
• Available in lengths of 30m, 50m and 100m
SPECIFICATIONS
HDMI Standards: High speed HDMI with Ethernet
HDMI Cable Type & Specifications:
• Connector Type: HDMI Type Male/A
• Hybrid optical cable with OM3 fiber
and copper wire
• HDMI version: 2.0
• HDMI output to display requires power:
via 1.5m USB cable
• Input Impedance: 100 ohms
• Supports resolutions up to: 4K@24/30/50/60Hz
& 1080p/60 & 3D
• PC resolutions: WUXGA 1920x1200,
• HDTV: 480p, 720p, 1080i & 1080p/60
& 3D formats
• Color sub-sampling supported
(4:4:4, 4:2:2, 4:2:0), Deep Color, and HDR
General characteristics:
• Bandwidth: 18 Gbps
• Color Depth Support: 30 bit, 36 bit and
48 bits with HDR support
• Vertical Frequency: Supports 60Hz & 120Hz
DC-Coupled inputs and outputs
• HDMI Power consumption: 0.2 Watts
• Differential Input: 100 ohms
• Regulatory Compliance: CE, FCC compliant
Environmental:
• Operating Temperature:
0°C to 50°C (32°F to 122°F)
• Storage Temperature:
-20°C to 70°C (-4°F to 158°F)
Shielding & Protection:
• Jacket outer material: PVC/TPU (custom)
• Triple-layer shielding for EMI/RFI rejection
• 28 AWG copper wire construction
Dimensions:
• Color: Black
• Connector Style: Straight
• Height: 0.4 in (10 mm)
• Length: 164 ft., (50 meters)
• Width: 0.8 in (20 mm)
• Weight: 2.4 lb. (1.1 kg)
• Shipping (Package) Weight: 3 lb. (1.4 kg)
• HDMI Cable Outer Diameter: 0.16” (4.2mm)
*NOTICE*
Side labeled “Tx” should be connected to the source.
Side labeled “Rx” should be connected to the sink
(display).
1405 Pioneer Street, Brea, CA 92821 | 888.975.1368 | [e-mail] | kanexpro.com