SW-HD4X1AUD4K SW-HD4X1AUD4K 4x1 HDMI Switcher with Digital Audio & 4K
SW-HD4X1AUD4K Table of Contents 1. Introduction .................................................................................................................................. 1 1.1. Introduction to SW-HD4X1AUD4K .............................................................................. 1 1.2. Features ...................................................................................................................... 1 1.3. Package Contents ........................
1. SW-HD4X1AUD4K Introduction 1.1. Introduction to SW-HD4X1AUD4K The KanexPro 4x1 HDMI Switcher is a compact design HDMI switcher that allows up to four Ultra HD or 1080p sources to be routed to one Ultra HD display with dedicated digital and stereo audio outputs. It supports resolutions up to 3840x2160 at 30p. Deep Color, 3DTV pass-through, and lossless audio formats such as LPCM 7.1, Dolby TrueHD, and DTS-HD Master Audio are also supported.
SW-HD4X1AUD4K 1.4. Specifications Signal Input/Outputs: § Input DDC Signal: 5 Volts p-p (TTL) § Input & Output Signal: High Speed HDMI 1.4a Spec Output Audio Signal: Toslink & 3.5 mm Stereo Operating Frequency: Vertical Frequency Range: 50/60Hz Video Amplifier Bandwidth: 2.97 Gbps per Channel Resolutions: § (HDTV) Interlaced (50&60Hz): 480i, 576i, 1080i § Progressive (50&60Hz): 480p, 576p, 720p, 1080p & 4K@30Hz HDMI Audio Output: § PCM 2/5.1/7.1 CH, Dolby 5.
SW-HD4X1AUD4K 1.5. Operation Controls and Functions Front Panel: ① Power on/off switch ② IN 1, 2, 3, 4 LED: LEDs illuminate red to indicate current active input source ③ 2.0CH, 5.1CH, 7.1CH LED: LEDs illuminate red to indicate current audio mode ④ IR: Remote control receiver ⑤ Audio Button: Press this button to select the 2.0CH, 5.1CH, or 7.
SW-HD4X1AUD4K Left Panel: ① Audio Out: This slot is where you will connect a speaker using a 3.5mm auxiliary cable ② SPIDF Out: This slot is where you will connect an amplifier with an optical fiber cable 1.6.
SW-HD4X1AUD4K 1.7. Remote Control Functions § Input: Press this button to cycle switch the input source. The LED light will indicate the corresponding input source. § ARC: This button has no function. § Audio EDID: Press these buttons to select the audio output mode. The LED light will indicate the corresponding audio mode. § IN1, IN2, IN3, IN4: Press these buttons to fast switch to the corresponding input source.
2. Warranty SW-HD4X1AUD4K KanexPro TM warrants that (a) its products (the “Product”) will perform greatly in agreement with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the product will be free from defects in materials and workmanship under normal use and service for a period of 1 year. B.
7 SW-HD4X1AUD4K
