User's Guide

76 8
• Host power supply : 120V~ 60Hz 10A
• Max Rated Load :1200W
• Operating frequency : 2.4GHz
• Working temperature : 0～35℃
• Color : White
• Use : Indoor
• Standby Power : <1W
9
You can use your voice to control the smart plug through
Google Home or Amazon Alexa
VOICE CONTROL
SECURITY INFORMATION
PRODUCT SPECIFICATION
PRECAUTIONS
The following equipment must not be connected to the remote control plug:
• Equipment with motor capacitors (such as refrigerators, etc.).
• Using the device unattended can cause fire or other damage (such as irons,etc.).
• Cathode-ray tube television.
• Do not use remote control plug outdoors, near dripping water, and in damp rooms
(bathrooms, etc.).
• The device must be used in a position where is easy to take it out in the event of a hazard.
• Equipment exceeding the technical value of the remote control plug (-> technical data).
1. Use Information
• There is no voltage when the plug is disconnected.
• Only applicable in dry rooms.
• The remote control plug can only be connected to a properly installed grounded contact
socket (120V - 60Hz).
• The remote control plug must not be plugged into an extension cord and must not be
overloaded (maximum 1200W).
• Do not open the device. Improper assembly may cause electric shock, short circuit or fire.
• Avoid humidity, extreme temperature, vibration and shock.
• Clean with a soft, slightly damp cloth. Do not use detergents or solvents. Do not immerse in water.
• Do not plug pins or other metal objects into power outlets.
• Danger! Do not place the device on the heater.
• The range of the remote control plug is severely affected by structural conditions (such as
reinforced concrete) or sources of electrical / electromagnetic interference (fluorescent lights,
cordless phones or earphones, TV/monitors, cables, etc.). If necessary, remove disturbance
sources or keep a proper distance.
• Do not plug multiple devices into each other.
2. Safety Information
1. Only using the device in a dry indoor place is recommended.
2. The smart plug can only be used within the range of max load power
mentioned in its specification.
3. Please contact the seller for replacement if the product is damaged during
transportation.
4. Please use the smart plug correctly. Keep the plug out of the reach of children.
Do not disassemble the plug by yourself, otherwise it may damage the product
or cause safety hazards.
1. Log in to your Google Home or Amazon Alexa account.
2. Find the "TuyaSmart" or "Smart Life" and start it.
3. You can control smart plug by voice assistant, when binding your "TuyaSmart"
APP account with the voice platform account successfully.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
MPE Requirements
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons
during device operation.
To ensure compliance, operations at closer than this distance is not recommended
.