Owner manual

29
Display Procedure
<To Download Measuring Units >
Press
[U ]
After “AU”, the data will be displayed.
Output
CO Unit; CO
2
Unit; temperature Unit; humidity Unit ; DT
Unit; WB Unit; AH Unit; HR Unit; OA% Unit
6.5.2 Transmission of Stored Memory
Display Procedure
<Enable humidity data output>
Press
[F ] , after [AF] ,
Humidity related data (such as DT, WB, AH, and HR) will be
displayed.
Display Procedure
<To release humidity >
Press
[G ]
, after [AG]
Humidity related data (such as DT, WB, AH, and HR) will be
displayed.
Display Procedure
<To Download Page Number >
Press
[P ] , after [AP]
Number of stored page will be displayed.
Display Procedure
<To Download Stored Data >
Press “Ｔ＊＊＊＊
” (※Must type in 4 digits)
Type in the desired page number after “T”.
After “AT”, the data will be displayed.
※ The numbers will be displayed in currently selected units.
NOT in units of at saving the data.
(As for %OA, only the average value in a page is outputted)
※ Calculated data will not be downloaded.
Output
- CALCULATION Mode ( pre [F] command)
Data#; CO; CO
2
; temperature; humidity
- CALCULATION Mode ( post [F] command)
Data#; CO; CO
2
; temperature; humidity; DT; WB; AH; HR
- %OA Mode:
Data#; %OA; R_A; S_A; O_A
AU
ppm;ppm;ﾟ C;%RH;ﾟ C;ﾟ C;g/m3;g/kg;%
AP
P0011
AT
2004/05/19;13:32:26
001;
0.9; 576; 23.4; 63.4
002;
0.8; 556; 23.4; 63.3
003;
0.8; 534; 23.5; 63.2
004;
0.9; 540; 23.5; 63.2
005;
0.9; 561; 23.4; 63.3
＊ Data setting of IAQ Monito
r
does not affect the data
setting: date format is fixed
to YY/MM/DD.
AF
AG