Instruction Manual

17
6.6 Data Clear Menu
To delete stored measurement data
Move the cursor to item “5.DATA CLEAR” on the main menu by using △ and ▽ then
press [SET]. The screen shown below will be displayed. If there are no data records, a message
“There is no record, Please set MENU key” will be displayed.
To select a specific range of data records to be deleted
:
Select “1” by using △ and ▽ then press [SET].
The cursor will move to the START field as shown in the
center screen on the left.
Use [SET] to move between fields, and △ and ▽
to change the values.
START: Input the number of the first data record you
wish to delete.
END: Input the number of the last data record you
wish to delete. (All the consecutive records
within the set range will be deleted. To delete a
single record set both start and end to the
number of the data record you wish to delete.)
SET:
- To confirm deletion of the data records in the
selected range, select YES and press [SET].
- To cancel deletion, select NO and press [SET].
To delete all the stored data records
:
Move the cursor to “2.ALL CLEAR” and press [SET].
Switch between YES and No using △ and ▽ .
- To delete all the stored data records, select YES and
press [SET]. All data will be deleted and the message
“There is no record, Please set MENU key” will be
displayed.
- To cancel deletion, select NO and press [SET].
Press [MENU] to return to the main menu.
Indicates the total
number of stored
data records
Select “2.ALL CLEAR”
and press .
SET
SET
Press