Manual

10
3. How to Take Measurements
Press the power switch located at the side of the CPC to turn on the CPC.
A screen indicating the CPC model and firmware version information will be displayed. Then it will
automatically switch to a warm-up screen
(Screen-1) . Warm-up takes about 600 seconds. The
warm-up time remaining will be counted down on the display.
Menu operation can be performed from this screen by pressing the [ENTER] key.
For descriptions of the Menu operation, see 3.3. Menu Setting (page 18).
Warm-up can be canceled by pressing the [UP] key.
When warm-up is completed or cancelled, the screen will switch to the <NORMAL> mode screen
(Screen-2).
For descriptions of the <NORMAL> mode, see 3.2.1 Normal Mode (page 14).
Caution
Screen-1 Warm-up Screen
Remaining
warm-up time
Indication of
warm up status
When warm-up is cancelled before its completion, remaining warm-up
time will be displayed on the <Normal> mode screen
(Screen-2) . While
this warm-up time is displayed, the measurement value will not be
accurate.