Manual

iii
Danger
This instrument is a Class 1 Laser Product.
A Class 3B laser diode is used as
a light source.
Never disassemble the product.
Disassembly of the product
may present danger on human health.
○ Never disassemble, modify or repair.
- This instrument uses a Class 3B laser diode as a light source. Disassembly is
very dangerous.
- Disassembly may cause short circuit and/or other failure in performance.
○ Require proper handling/use in accordance with the instructions provided in
this operation manual.
- Improper usage may cause electric shock, fire hazard, or damage.
○ If abnormal noise, smell or smoke is observed, or if liquid has entered the
instrument, turn off the instrument immediately, remove the batteries or pull
out the plug
- Negligence may cause electric shock, fire hazard or damage.
- Please contact your distributor or KJI’s service center for repair.
○ Do not use or keep the instrument in an environment where ambient
temperature reaches 30 degrees C or above.
-
Use of the instrument out of the specified temperature range may cause
extreme deterioration in performance.
-
It may also deteriorate the insulations of the electrical components, which may
cause short circuit or fire hazard.
○ Pull out the plug when the instrument is not in use.
- Negligence may cause electrical shock, fire hazard, or circuit damage.
○ Before using the AC adapter, make sure that there is no dust accumulated on
the plug. The plug must be connected to a dedicated receptacle of 100-240V.
- Negligence may cause a fire hazard.
○ Use the AC adapter supplied with the instrument.
- Use of other commercially-available AC adapters may cause short circuit or
fire hazard, due to the possible difference in polarity and standards.
Laser Warning
Laser Warning Label
CLASS 1 LASER PRODUCT
Handle Properly
Prohibited
Installation
Do not modify /
disassemble