Instruction Manual

23
5-2 Printing Stored Data
Required Items:
To print the measured data, a dedicated cable and printer is required.
Printer Cable MODEL 3887-07
Printer DPU-H245
Connect the printer cable to the communication connector of the instrument.
Power up the printer. (Internal setting is not necessary.)
The data stored in the instrument can be printed out from the dedicated printer connected to the
instrument by the following procedure.
Power Up
<MENU>
1.MEASURE MODE
2.DATA PROCESSING
3.OPTIONS
< DATA PROCESSING >
RECORDS 99999
1.DISPLAY 3.PRINT
2.UPLINK 4.CLEAR
Press ENTER key
<PRINT>
RECORDS 9999
1:START 9000
2:END 9010
Press ENTER key
Press START/STOP key