User Manual Owner's manual

21
§ 5 Setting the Measurement Unit and Baud Rate
List of Measurement Units:
●Air velocity: m/s, FPM
●Volumetric flow rate:
m
3
/h, ft
3
/min, m
3
/min
●Air temperature: °C, °F
●Length: mm, inch
●Measurement Mode
Press the key to enter the unit
setting mode.
●Length Unit
The unit to be set will blink.
Use keys to select the unit.
Press the key to save the setting
and to proceed to the next unit setting.
●Air Velocity Unit
Repeat the above procedure for each
unit.
●Volumetric Flow Unit
●Air Temperature Unit
●Baud Rate
Serial communication
baud rate used in this
instrument is shown
on the right.
4800bps
9600bps
19200bps
38400bps
*The saved
setting will be
kept even
when the
instrument is
turned off.
*To exit
(cancel) the
unit/baud rate
setting, press
the key.
Any setting
saved before.
<Unit Conversion Table>
Air Velocity: 1m/s=196FPM
Air Temp: T (
O
F)=1.8×T(
°C)+32
Volumetric Flow: 1 m
3
/h=35.32 ft
3
/h
Length: 1inch=25.4 mm
■
Serial
communication is
only available on
MODEL6036