User guide

17
<To Set Duct Size>
Registering a Rectangular Duct
Use to select “3. WIDTH” and
press
.
Use to enter the
width and press
.
Use to select “4. HEIGHT” and
press . Use to enter the
height and press .
The maximum is 9999mm or 999.9 inch.
Registering a Circular Duct
Use to select “3. DIAMETER”
and press . Use to enter
the diameter of the duct and press .
The maximum is 9999mm or 999.9inch.
<To Set Units (mm/inch)>
Use to select “5. UNIT(mm/inch)”
and press .
*For a circular duct, select
“4. UNIT (mm/inch)”.
Use to select mm or inch and
press .
<To Save the Setting>
Use to select “6. SAVE INFO” and
press .
This will complete the Duct Shape/Size
Input and you are back in Main Menu.
If you press before you save, you will go back to the Main
Menu without completing the Duct Shape/Size Input.
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WIDTHoooooooooo800
4.HEIGHTooooooooo500
5.UNIT(mm/inch)aaamm
6.SAVEaINFO
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WaSIZEaaaaaaaaa800
4.HaSIZEaaaaaaaaa500
5.UNIT(mm/inch)aaamm
6.SAVEaINFO
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WaSIZEaaaaaaaaa800
4.HaSIZEaaaaaaaaa500
5.UNIT(mm/inch)aaamm
6.SAVEaINFO
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaCIRCLE
3.DIAMETERaaaaaaa300
4.UNIT(mm/inch)aaamm
6.SAVEaINFO