User guide

22 Measuring Max, Min, and Mean: CALCULATION Mode
§ 4 Measuring Max, Min, and Mean: CALCULATION Mode
CALCULATION Mode will automatically calculate the maximum,
minimum and mean of the measured data.
Press to enter the Main Menu. Use
to select “3. CALCULATION”
and press .
CALCULATION Mode Display Icons
1. CALCULATION Mode
AVERAGE: Takes a measurement
every second and then displays the
average for the set sampling time.
INSTANT: Takes a single
measurement at the end of the
sampling time.
2. SAMPLING TIME (1 to 999 sec)
To set the length of the sampling time.
3. No. TRIAL (N) (1 to 9999 times)
To set the number of samples (trials) needed. Each trial will be
for the duration specified in sampling time.
4. DATA STORAGE (YES or NO)
5. SET TO START
Save the settings and return to standby.
MENUaa1.NORMAL
aaaaaa2.DUCTaTYPE
aaaaaa3.CALCULATION
aaaaaa4.FLOWaRATE
aaaaaa5.DATAaOUTPUT
aaaaaa6.DATAaCLEAR
aaaaaa7.UTILITY
aaaaaa8.PRESSUREaZERO
Remaining Memory
Available
Total Memory
The 1
st
trial The 2
nd
trial The N
th
trial
TRIAL(1) TRIAL(2) …………… TRIAL(N)
Measuring Time……Sampling Time x N (Number of Trial)
Sampling Time
CALCULATE R20000/20000
1.MODE11111111AVERAGE
2.SAMPLING(TIME)0012s
3.SAMPLING(n)110050
4.DATA2STORAGE2?22YES
5.SET2TO2START