User guide

27
<Setting the No. TRIAL>
Use to select
“2. SAMPLING(n)”and press .
Use to select No. TRIAL (1 to
9999) and press .
<Setting MEAS. POINT>
Use to select
“3. MEAS. POINT” and press .
Use to select the number of
MEAS. POINT (1 to 2000) and press
.
<Data Storage>
Use to select
“4. DATA STORAGE?” and press .
Use to select YES or NO and
press
.
<Selecting DUCT ENTRY No.>
Use to select
“5. DUCT ENTRY NO.” and press .
*If you select an empty ENTRY NO., you
cannot start the Flow Rate measurement.
The duct type settings screen will be
displayed. Here you can input the
dimensions of the duct.
*Refer to “Duct Shape/Size Input” on P.16 for
details.
<Save the Settings>
Use to select
“6. SET TO START” and press .
If you press before saving the settings you will return back to the
Main Menu and any setting changes you made will not be saved.
aaaaaaaDUCTaTYPE
1.ENTRYaNo.aaaaaaaa1
2.SHAPEaaaaRECTANGLE
3.WIDTHoooooooooooo-
4.HEIGHTooooooooooo-
5.UNIT(mm/inch)aaamm
6.SAVEaRETURN
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
SINGLE (R20000/20000
1.SAMPLING(TIME)001os
2.SAMPLING(n)110050
3.MEAS.2POINT220010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START