User guide

28 Measurement of Air Flow FLOW RATE Mode
aaaaaa0001/0015aaa~
RDY.
P
2222
N
2221
D
2223
C
2300
---502a
27.1e
62.9g
<Ready>
The ready screen will be displayed.
Use while pressing to
change the entry no. of the duct type.
Press to start measuring.
Display Icons
1. RDY: Current Status (READY/SAMPLE)
2. P 1: Current Number of Points
3. N 1: Current Number of Trial
4. D 3: Selected Duct Entry Number
5. C300: Duct Shape and Size
(In this case, the duct is circular and 300mm in diameter.)
For the rectangular duct, W*** and H*** will be displayed.
<While Measuring>
Press to stop the measurement. To
continue measuring, press again.
Press to complete the
measurement. Then the results will be
displayed.
If Point 1 is not completed, no results will be displayed on the screen.
Press to complete the measurement without storing data.
<READY After Point 1>
After completing the measurement of
Point 1, the instrument will be in
STANDBY, ready to measure Point 2.
<RESULT>
After the completion of the
measurement, the results will be
displayed.
Press to select the parameter in
the following sequence: Air Flow→
Air Temperature→Humidity→
Air Velocity
Press to return to the Main Menu.
Press to return to the setup screen of the FLOW RATE Mode.
*If “DATA STORAGE” is set to YES, the results will be stored.
'12/04/12a16:11:59 ~
RDY.
P
2221
N
2221
D
2223
C
2300
--6037a
25.1e
63.7g
1
2
3
4
5
Number of Points already measured
Number of Points
■ Humidity is only
available on
MODEL6531/6533.
■ Air temperature is
only available on
MODEL6531/6541
/6542/6533/6543/
6561.
'12/04/12a16:24:37 ~
SMP .
P
2221
N
2224
D
2223
C
2300
--6037a
24.9e
63.7g
aNEXT112001/015222 ~
RDY.
P
2222
N
2221
D
2223
C
2300
--6502a
27.1e
62.9g
aNEXT1FLOW2RATE
MAX
AVG
MIN
106433a
085134a
066797a