User guide

30 Measurement of Air Flow FLOW RATE Mode
'12/04/12a16:11:59 ~
RDY.
P
2221
N
2221
L
2221
C
2300
---502a
27.1e
62.9g
<Save the Setting>
Use to select
“6. SET TO START” and press .
If you press before saving the settings you will return back to the
Main Menu and any setting changes you made will not be saved.
<Ready>
The ready screen will be displayed.
Use , while pressing to
change the entry number of the duct
type. Press to start measuring.
Follow the same procedure as SINGLE
mode to measure.
Display Icons
1. RDY: Current Status (READY/SAMPLE)
2. P 1: Current Number of Points
3. N 1: Current Number of Trial
4. L 1: Current Number of Location
5. C300: Duct Shape and Size
(In this case, the duct is circular and 300mm in diameter.)
For the rectangular duct, W*** and H*** will be displayed.
<Display the Results>
After all the measurements at all
locations are completed, the
calculation results will be displayed.
Press to display the results of
each item in the following sequence:
Flow rate→Air Temp→Humidity→
Air velocity
Press to print the results, when a printer is connected.
Press to return to the Main Menu.
Press to return to the setup screen of FLOW RATE Mode.
*When “DATA STORAGE” is set to YES, values of each location will
be stored.
MULTI (R20000/20000
1.SAMPLING(TIME)001ps
2.SAMPLING(n)110050
3.MEAS./LOC.oo010/010
4.DATA2STORAGE2?22YES
5.DUCT2ENTRY2NO.2221
6.SET2TO2START
①
②
③
④
⑤
aNEXT1FLOW2RATE
MAX
AVG
MIN
106433a
085134a
066797a