User guide

44 Analog Output
Press to enter the Main Menu.
Use to select “7. UTILITY”.
Press .
Use to select
“3. ANALOG OUTPUT”.
Press
<To Select Data>
Select “1. OUTPUT SELECT” and press
.
Use to select “VEL.” (Velocity), “PRS.” (*Pressure),
“HUM.” (*Humidity), or “TMP.” (*Temperature).
Press .
<To Set the Output Range>
Use to select “2.” (selected
parameter) and press
.
Use to select the range and
press
.
<To Save the Settings>
Use to select “3. SAVE INFO”.
Press .
If you press before you save, you will return to the Main Menu
and the settings will not be saved.
MENUaa1.NORMAL
aaaaaa
2.DUCTaTYPE
aaaaaa
3.CALCULATION
aaaaaa
4.FLOWaRATE
aaaaaa
5.DATAaOUTPUT
aaaaaa
6.DATAaCLEAR
aaaaaa
7.UTILITY
aaaaaa8.PRESSUREaZERO
AaaANALOG OUTPUT
1.OUTPUT
2SELECT22V
EL.
2.VEROCITY
22222222222
0-1022m/s
3.SAVE
2INFO
AaaANALOG OUTPUT
1.OUTPUT
2SELECT22
VEL.
2.VEROCITY
22222222222
0-1022m/s
3
.SAVE2INFO
aaaaaaaUTILITY
1.TIME AJUST
2.UNIT SELECT
3
.ANALOG OUTPUT
4.TC(T.H.P) SET
oooooooUTILITY
1.TIMEoADJUST
2.UNIToSELECT
3.ANALOGoOUTPUT
4.TC(T.H.P)oSET
5.BACKLIGHToON/OFF
AaaANALOG OUTPUT
1.OUTPUT
2SELECT22
VEL.
2.VEROCITY
22222222222
0-3022m/s
3.SAVE
2INFO
■ Pressure is only
available on
MODEL6501-B0
/-C0.
■ Humidity is only
available on
MODEL6531/6533
■ Air temperature is
only available on
MODEL6531/6541
/6542/6533/6543/
6561.