MODEL.6710 CAPTURE HOOD DATA ACQUISITION SOFTWARE INSTRUCTION MANUAL 01001 1 2 .
Note: 1. Specifications and the related details in this manual will be subject to change along with the software version upgrade. 2. Working principle :one software corresponding to one PC.
TABLE OF CONTENTS 1. SUMMARY.............................................................................................................. 4 2.Software installation: ............................................................................................. 6 3. How to use the software ....................................................................................... 9 3.1 Start .................................................................................................................. 9 3.
1. SUMMARY This manual explains how to upload the data with the computer software. The data stored in the flash memory will be read and transferred, including：Air flow rate（m³/h）, Temperature（℃）, Humidity（%RH）and so on. Then these records will be saved in Microsoft office Excel (*.CSV) compatible file format. Instrument settings: 1） Communication settings Display Shows Operating key POWER 【MENU】 Explanation Press “POWER” to enter the main interface. Press and hold for 2 seconds to enter “MENU”.
2）Connection illustration for reference: Main Structure Communication Cable Figure 1-1 PC 3) Software support: Item content Operating system Microsoft Language Communication Windows XP, Microsoft Windows 7 English or Simplified Chinese USB connection with PC 4) PC configuration request： .CPU IBM PC compatible machine with CPU Pentium II or above .Interface 1 USB port .Operating system Microsoft Windows XP, Microsoft Windows 7 .RAM ≥256MB .HDD ≥100MB free disc space .
2. Software installation: 1) It’s recommended that you turn off other application programs before the installation. Insert the CD-ROM into the disk driver. ， and double click Then open the folder to begin the installation. The screen shown in Figure 2-1 will appear. Press “Next”. Figure 2-1 2) Then the screen shown in Figure 2-2 appears. Press “Next” after you select a folder to install this Figure 2-2 6 software.
3) Then the screen shown in Figure 2-3 appears. Press “Next” to start the installation. Figure 2-3 4) Wait until the installation finishes, as shown in Figure 2-4.
5) When the screen shown in Figure 2-5 appears, press “Close”. Figure 2-5 6) After clicking “Close”, the icon shown in Figure 2-6 will be displayed on the screen indicating installation was successful.
3. How to use the software 3.1 Start Double click the icon to start the data reading software. A sample of the opening software screen is shown ID No.
3.2 Data download Connect a USB cable, click【Down Load】and the display will change as shown below： Figure 3-2 3.3 Data Hiding Double click the gray area for hiding the small ID data , so you can easy see the bigger ID data.
3.4 Flow Unit switch Click【Unit】to change the displayed unit and the following box will appear： m3 /h CFM Figure 3-4 l/s 3.5 Temperature Select the unit switch: temperature unit as shown below： Celsius degree Figure 3-5 Fahrenheit degree 3.6 Data Save Click【Save Data】to save the data and you will be prompted to choose a location to save the data to as figure 3-6 shown below. Select a file name and location saving the data.
Figure 3-6 EXCEL file layout 12
