User Manual

8
z SAVE: Save the current test results.
z SET:
Store changes or enter into the selected option’s next level interface.
z MENU: On the main screen holding this down for 2 seconds will enter into the main
“MENU”.
z OK: Pressing for 2 seconds will save the date or time in the “General Settings”,
Pressing for 2 seconds will delete saved data in the “Record Processing”.
z START: Begin a measurement in main menu.
z STOP: Stop a measurement in main menu.
z BACK: Cancel or end an operation or return to the previous screen.
z EXIT: Return to the main menu.
z ESC: Stop printing when printing.
Left / right switches on the base
Left switch on base
Press it once quickly to start or stop a measurement. Press and hold it in for at least 3
seconds to tilt the control panel and LCD screen downward.
Right switch on base
Press it once quickly to save the current data. Press and hold it in for at least 3 seconds to tilt
the control panel and LCD screen upward.
4.5 Incline Adjustment Settings of the Instrument
Start up the instrument and lift the capture hood to the approximate height you will be working
at. Press and hold the left button on the base to tilt the panel downward, or press and hold the right
switch to tilt it up. The buttons must be held down for a minimum of 3 seconds before the panel will
begin to tilt. While the panel is moving, you will hear an audible buzzing.
Left switch
Right switch