Handheld LPC Data Retrieval Software for Windows MODEL S388-70 Operation Manual Read this manual carefully and understand the warnings described in this manual before operating the product. Keep this manual handy for ready reference. Kanomax Japan, Inc. 02001 2007.
NOTICE: 1. The copyright of this software belongs to Kanomax Instrument (Shenyang) Ltd. 2. Any unauthorized duplication of the product, in whole or in part, without written consent from Kanomax Inc. is strictly prohibited. 3. Purchase of one set of software per computer is required. 4. Contents of the Operation Manual are subject to change without notice.
Table of Contents 1. Connecting the Handheld LPC with a Computer .................................... 4 1.1 Handheld LPC Settings ...................................................................................................................... 4 1.2 Connecting with a Computer .............................................................................................................. 6 1.3 Software Operating Requirements ................................................................................
1. Connecting the Handheld LPC with a Computer This software Operation Manual describes the method of transferring the data stored in the Handheld Laser Particle Counter (LPC) Model 3887 to a personal computer (hereinafter “computer”), and storing the data in a CSV format. 1.1 Handheld LPC Settings 1) UPLINK Mode Setting To transfer the data stored in the Handheld LPC to a computer by using the software, the Handheld LPC must be set to the UPLINK Mode. Display Screen
2) Confirm the Handheld LPC Communication Address Confirm the Handheld LPC communication address by the following procedures. Key Description Display Screen Operation
1.2 Connecting with a Computer Connect the instrument with a 9 pin COM port of the Computer. Backside of the computer Computer Fig. 1-2 Hardware Connection Diagram 1.
2. Software Installation 1) Before installing the software, shut down (exit) all operating application programs. Insert the installation CD into the CD-ROM drive, select the “Handheld LPC Data Retrieval Software” folder, and double click the installation icon “Setup.exe”. (Note: If an old version of this software is already installed in the computer, please make sure to uninstall the old version before installing the new version.
4) Select the Program Group for installing the software. By default, a program group called “Kanomax” will be created. To proceed with the default setting, click the “Continue” button, and the installation will start. Fig. 2-3 5) The following window will be displayed while the installation is in progress. Fig. 2-4 6) When installation is completed properly, the following window will be displayed. Click the “OK” button to close the window. Fig.
3. Operation 3.1 Program Startup To start the program, select: [Start] → [All Programs] → [KANOMAX] → [Handheld LPC Retrieval Software]. The program will start on clicking the [Handheld LPC Retrieval Software].
3.2 Transferring Data from the Handheld LPC Data stored in the Handheld LPC can be transferred to the computer by the following procedures. 1) Select the measurement mode of the data to be transferred. Measurement Modes: REPEAT, SINGLE, CONTINUOUS, CALCULATION, ISO>4 2) Set the instrument Address to match the ID number set for the Handheld LPC. 3) Set the computer Port number. 4) Click the to read in and display the data stored in the Handheld LPC on the Data List section.
3.3 Saving Data To save all data, click: To save selected data, click the data number of the desired data, and click: When either displayed for saving the data. or is clicked, the following window will be Note: File type “CSV” must be selected. : To save the data file. : To exit without saving the data file.
The following is an example of an Excel sheet, which is displayed when the saved data is opened.
3.4 Printing Data To print all data, click: To print selected data, click the data number of the desired data, and click: When either or displayed for printing the data. is clicked, the following window will be Description: : To print a data file. : To exit without printing a data file.
3.5 Setting Time/Date of the Handheld LPC Click the “Time Setup with 3887” tab to display the following dialog box.
3.6 A change of an Handheld LPC type It is written on the back of the main body of Handheld LPC whether it is " A-Type"or "B-TYPE". As for the initial setting of this software, it is typed "A". I set it with this change button, and, in the case of "B" type use, please use it.
3.7 Closing the Software Program Click the button to close the software program.
4. Warranty and After Service Warranty ¾ A warranty card is not included in this product. ¾ The instrument (excluding consumables such as batteries) is warranted against defects in materials and workmanship under normal use for a period of one year from the date of original purchase. After Service ¾ When you have a problem with your unit, please check out the “Troubleshooting” section first.
5. Contact Information U.S.A. KANOMAX USA, INC. PO Box 372, 219 Route 206, Andover, NJ 07821 U.S.A. Tel: (800)-247-8887 / (973)-786-6386 FAX: (973)-786-7586 URL: http://www.kanomax-usa.com/ E-Mail: info@kanomax-usa.com JAPAN KANOMAX JAPAN, INC. 2-1 Shimizu Suita City, Osaka 565-0805, Japan TEL: 81-6-6877-0183 FAX: 81-6-6879-2080 URL: http://www.kanomax.co.jp/ E-Mail: sales@kanomax.co.jp CHINA Shenyang Kano Scientific Instrument Co., Ltd No.
