English User Manual YU6 Powered Speakers YUMI POWERED SPEAKERS Supporting your digital lifestyle™
Important Safety Precautions ATTENTION The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus. • • • • • • • • • • • CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE BACK PANEL.NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Read these instructions. Keep these instructions. Heed all warnings.
Introduction Thank you for choosing YU6 Powered Speakers, designed by Kanto in Canada. YU6 outputs 200W Peak power into 6 Ohm speakers, for remarkably bold and clean sound. Excellent sensitivity and frequency response provide deep thumping lows and clear, scintillating highs. YU6 is an amazingly flexible speaker system that can accept five input sources and connect to a subwoofer for enhanced low frequency response.
Front & Rear Panels 1 FRONT PANEL 1 1” Silk Dome Tweeter 2 5.25” Kevlar® Mid/Woofer Driver 3 LED White - Power on / Playback Mode Yellow - Standby (solid) - Mute (flashing) Blue - Discover Mode (flashing) - Paired (solid) 4 Volume / Input Select / Standby / Wake-up 2 REAR PANEL 5 RCA L/R Input 6 3.
Remote Control Install two supplied AAA batteries in the back of your YU6 remote. Remote Control functions are listed below. 1 Standby Button - press to enter Standby Mode or return to Playback Mode 2 RCA Input Select 3 3.
Setting Up Your Speakers The YU6 powered speaker system is designed for either bookshelf or stand mounting. The stands should be of rigid construction, between 26” to 32” high. We recommend the Kanto SP26 speaker stands to go with your YU6. The space between the two speakers and the distance from the listener is important. If the speakers are positioned too close or too far apart, stereo imaging will not be fully developed.
Connecting Audio Sources YU6 features a high quality DAC (digital-to-analog converter) for the optical inputs that supports data streams up to 24-bit/96 kHz resolution. YU6 supports Bluetooth 4.0 with Qualcomm® aptX™ technology. Use the appropriate audio cable to connect your audio source components to your speakers. • 3.5 mm stereo mini-jack AUX cable • Stereo RCA to 3.
Connecting a Subwoofer YU6 is equipped with a RCA connector to provide output signal to a powered subwoofer. Simply connect a single RCA cable from the SUB OUT connection on the YU6 to the AUDIO INPUT on your subwoofer. If your subwoofer has a stereo L/R RCA input, either input will work. We recommend the Kanto sub6, sub8, or YURI powered subwoofer with crossover and volume controls. Most quality subwoofers offer these controls, which allow you to customize the amount of bass you will experience.
Bluetooth® Pairing YU6 features Bluetooth 4.0 with Qualcomm® aptX™ technology and can be paired with many devices for wireless audio playback from your phone, MP3 player or tablet. Pairing is easy. 1. Press the Bluetooth button ( ) on YU6’s remote to select it as the input source. The Bluetooth LED (blue) will flash to indicate that YU6 is in pairing mode. 2. Enable your Bluetooth device to search for a new device to pair with.
Audio Troubleshooting Guide Frequently asked questions about Kanto’s YU6 speakers. 1. None of the lights on the front panel are illuminated. • Make sure the power cable is connected to the speaker and power outlet. • Ensure that the power outlet is providing power. • Verify that the power switch on the rear of the speaker is in the “On” position. 6. You are experiencing poor audio quality. • Set the volume of the source to its highest level. Low source volume can negatively affect dynamic range.
Specifications YU6 POWERED SPEAKER SYSTEM Tweeters Woofers Nominal Impedance Amplifier Type Power Output Input Sensitivity Total Harmonic Distortion Crossover System Crossover Frequency Frequency Response Inputs 1 inch Silk Dome 5.25 inch Kevlar 6 Ohm Class D 200 Watts Peak 560 mV < 0.3% 2-way 2.0 kHz 50 Hz - 20 kHz 1 x 3.
• Check out our full line of bookshelf and desktop speaker systems Regardez notre sélection des systèmes de haut-parleur d'étagère et de bureau Consulte nuestra línea completa de sistemas de altavoces de estantería y escritorio • Available in a stunning array of colors Disponible dans un choix renversant de couleurs Disponible en una impresionante variedad de colores + + SP32PL SP26PL + + + To learn more about all our audio products, visit www.kantoaudio.
