User's Manual

3. Installation

3.1. Note for Placement

3.2. Hardware Set-up

3.3. Completing set-up

Before you set-up the AR2146, please thoroughly read the below placement guide for your successful internet

connection of the AR2146.

This section is for the hardware installation of the AR2146. While you proceed the installation, the internet connection

will not be available until the set-up process is fully completed.

After the hardware set-up, you should log in to the router and congure it. Please refer to the next page for the cong-

uration.

Place the router near the center area where your connected devices like computers, tablets, and mobile phone

operate. Please avoid placing the router in the closed area such as cabinet or closet. In this case,

Wi-Fi performance can deteriorate due to obstacles.

Place the router in an slightly elevated location minimizing the number of walls and ceilings between the router and

the connected devices.

Please avoid placing the router besides the below appliances or objects:

Home Security Devices or System

Fans

Microwaves

Computers

Cordless phones

Metal Objects

1) Place the router near the power outlet and internet line

2) Unplug your modem’s power, leaving the modem connected to the wall jack for your Internet service

3) Connect your modem to the Internet port of your router with the Ethernet cable that came with your router.

4) Connect the power adapter to your router and plug the power adapter into an outlet.

5) Press the Power On/O button on the rear panel of the router.

6) Conrm that the following LEDs are on and solid to verify the hardware is connected correctly.