User's Manual
27 Kaonmedia Proprietary and Condential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
1) System delegated prex
When IPv6 IP address is given to the AR2146, it is displayed in this box.
2) Stateless
User can enable or disable the IPv6 stateless function.
3) DHCPv6 Server
User can enable or disable DHCPv6 server function of the CPE. Once it is set to Enable, the CPE will provide IPv6 IP
addresses to its connected device.
4) Stateful
User can enable or disable “stateful” function. When it is “disabled”, the following menu (start interface id, end interfact
id, leased time) will become inactive.
5) Start IP Address
Enter the starting IPv6 address for the DHCPv6 assignment.
6) End IP Address
Enter the ending IPv6 address for the DHCPv6 assignment.
7) Leased Time (Hour)
Enter the length of time for the IP address lease in hour for the DHCP IP address. .
User can congure the IPv6 information.
8.2.2 LAN Service – IPv6 LAN Auto Conguration
A user can select a specic device by clicking the MAC address from the table to and congure a specic IP address to
the device manuy.
9) Apply
When user click “Apply”, the new entry of the network conguration get applied to the CPE.
1
2
3
4
5
6
7