User Guide AC1600 Whole Home Wi-Fi Mesh System AR3030W
Contents About This Guide 3 Product Overview 4 LEDs 5 Product Specifications 6 Set Up Your AR3030W 7 Dashboard 10 Wi-Fi Settings 11 Guest Access 12 LED 13 Common Setup Issues 14 Trouble shooting 16 2
About This Guide This guide provides a brief introduction to AR3030W Whole Home Mesh Wi-Fi System and the mobile app, as well as other useful information. Copyright Statement Please note that features of AR3030W may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for informational purposes only, and may change without notice.
Product Overview Each AR3030W has five (5) LEDs, two (2) RJ-45 Gigabit Ethernet LAN ports, WPS and RESET buttons and a Power Connector. See the explanation below: Power Connector: For Connecting AR3030W to the a power outlet via the provided power adaptor Reset Button: For resetting AR3030W to factory default settings LED: 2.
LEDs Each AR3030W has five (5) LEDs that changes color according to its status. See the explanation below: LED description LED 2.4G 5G ETH MESH 2.4G 5G ETH MESH POWER Green Green Green Green Green Yellow Yellow None Blue None Power Color Description Green The 2.4GHz radio is operating. Yellow Case 1 : The Wi-Fi connection between AR3030Ws is weak. Case 2 : The additional AR3030W is not connected to the AR3030W connected to your home gateway. Green The 2.4GHz radio is operating.
Product Specifications General Device Interfaces • Two 10/100/1000 Mbit Ethernet LAN ports • WPS button • Pin-sized reset button • Power port LEDs • 2.4 GHz band uplink/downlink strength • 5 GHz band uplink/downlink strength • Ethernet • Mesh Network • Power Antenna Type • Two internal antennas (Dual band) Data Signal Rate • 2.4 GHz: up to 300 Mbps • 5 GHz; up to 1300 Mbps Standards • IEEE 802.11ac • IEEE 802.11g • IEEE 802.11a • IEEE 802.11n • IEEE 802.
Set Up Your AR3030W Follow the steps below to set up your AR3030W Whole Home Wi-Fi. 1. Download the KAON Smart Wi-Fi app 2. Read the Terms of Service 3. Connect your home gateway to AR3030W Scan the unique QR code below to download the KAON Smart Wi-Fi app. Launch the app. Read and review the Terms of Service carefully before using the service. Clicking “I agree to the Terms of Service" constitutes your acceptance and agreement to be bound by the Terms of Service.
Set Up Your AR3030W Follow the steps below to set up your AR3030W Whole Home Wi-Fi. 4. Find and connect your AR3030W 5. Choose your AR3030W 6. Log in with KAON AR3030W ID Tap the Scan QR code button, and then point the camera at the QR code on the back or bottom of the device. You can see a list of AR3030W(s) connected to your phone or network after connecting your phone to the AR3030W successfully. Enter your login information printed on a label on the back or bottom of the AR3030W to log in.
Set Up Your AR3030W Follow the steps below to set up your AR3030W Whole Home Wi-Fi. 7. Add more AR3030Ws 8. Connect your additional AR3030Ws 9. Create a mesh network You can see the dashboard of the app after setting up your Wi-Fi network successfully. Just like the way you connected your primary AR3030W to your phone, point the camera at the QR code on the back or bottom of the device.
Dashboard After you successfully set up your AR3030W network and create a mesh network, you will see the dashboard of the KAON app. Here you can view working status of all AR3030Ws, its network topology, and the connected devices per AR3030W. Dashboard Manage your AR3030W(s) Speed Test You can view the status of all the AR3030W, real-time upload/download speed, and connected devices per AR3030W. Tap the AR3030W icons on the home screen to see details of the corresponding AR3030W units.
Wi-Fi Settings View or change your Wi-Fi name and password of your network, and share it with your family and friends. Wi-Fi settings Change your Wi-Fi name and password Tap the Tools icon on the top right-hand corner to view to display more features. And then tap Wi-Fi settings to view or customize your Wi-Fi name and password of your network. Create your own 2.4GHz and 5GHz Wi-Fi name and password, and then tap the Save button.
Guest Access Create and manage separate internet access for your guests, and share it with them. Guest access Create your guest Wi-Fi network Tap the Tools icon on the top right-hand corner to view to display more features. And then tap Guest access to create your guest Wi-Fi network name and password . Set up a time schedule, and create Wi-Fi network name and password for your guests. You can share the network details with guests by tapping the Share icon located on the top right-hand corner.
LED Manage the LED lights on all your AR3030Ws for your preference. Wi-Fi settings Disable/enable the LED lights Tap the Tools icon on the top right-hand corner to view to display more features. And then tap LED to either disable or enable the LED lights on all your AR3030Ws. Set a schedule to enable blinking all the LED lights (2.4G LED, 5G LED, ETH LED, MESH LED, POWER LED) on all your AR3030Ws.
Common Setup Issues (1/2) Here you can see help articles below. 1. The QR code of your primary AR3030W is missing or you’re unable to scan it with your phone. 2. The QR code of your additional AR3030W is missing or you’re unable to scan it with your mobile phone. 3. The AR3030W can’t connect to the Internet. Tap Set up manually button and follow the step-by-step instructions on the App to connect your primary AR3030W to your mobile phone.
Common Setup Issues (2/2) Here you can see help articles below. 4. The AR3030W(s) is not found during setup. 5. Mobile device isn’t connected to my Wi-Fi network 6. Stuck in your mesh network’s setup Check the power and Ethernet cables and make sure they are securely in place. Exit the KAON app, and open your phone’s Wi-Fi settings. Make sure Wi-Fi is turned on, and connect to your Wi-Fi network.
Troubleshooting (1/2) Here you can see help articles below. 1.How do you find your username and password? 2. None of the LED lights turns on. 3. Your phone isn’t connected to your Wi-Fi network once you change it’s settings. The default login information including username and password is printed on a label on the back or bottom of the AR3030W. If the default login information does not work properly, you need to reset all the AR3030W(s) by pressing the ‘Factory reset’ button for minimum 5 seconds.
Troubleshooting (2/2) Here you can see help articles below. 4. You’re unable to rescan it with your phone once you change either your Wi-Fi name or password. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
