Specifications

CG3000
Quick
Installation
Guide
3. Rear Panel
CG3000
Quick
Installation
Guide
3
5G
Off
5G WiFi Interface disabled.
On
5G WiFi Interface enabled.
2.4G
5
6
7
8
Off 2.4G WiFi Interface disabled.
Flashing 2.4G WiFi is sending or receiving data.
On 2.4G WiFi Interface enabled.
Flashing
5G WiFi is sending or receiving data.
Push
Button for WPS configuration.
WPS
9
3
2
1
4
5
2. LED Status
LED
Power
up
Initial
DS
scan
DS
locking
US
ranging
Request
CM IP
Request
CM
config
CMTS
register
Complete
Request
MTA IP
Request
MTA
config
Restart
Voice
service
Telephone
Register
complete
Power On On On On On On On On On On On
DS
Blinking
Blinking
On On On On On On On On On
US
Blinking
Off Off
Blinking
On On On On On On On
ONLINE
Blinking
Off Off Off Off Blinking On On On On On
2.4G/5G
Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off
ETH1~4 Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off
TEL1~2 Off Off Off Off Off Off Off Blinking Blinking Blinking On
TEL1~2
Off
The telephony service isnot available.
Flashing
The telephony line is in use.
On
The telephony service is available.
ETH 1~4
Off
The LAN port is not connected.
Flashing
The LAN portis sending or receiving data.
On The LAN port is connected.
CG2200
Quick
Installation
Guide
CG2200
Quick
Installation
Guide
RESET
Pin-hole for factory reset.
LAN1~4
RJ45 Ethernet ports to connect your PC or home network devices.
CABLE IN Connects the coaxial cable for cableinternetservice.
3
2
1
4
TEL1~2
RJ11 Telephone ports to connect your phone or fax.
5
12VIN
Connects the unitto DC 12V power.