Installation Guide

KSTB2100
User Installation Guide
12
WiFi Network Connection
Connect Automatically Using WPS
Navigate to the main menu by pressing the following key sequences:
Home
→
Settings
→
Network
→
WiFi
→
Select to enable.
Once WiFi has been enabled, using the remote scroll down and select “Connect via WPS”.
Once selected press the WPS button on your home router. The Set-Top Box will automatically connect to the
WiFi network.
Ensure that WiFi network signal strength is strong or very strong .
Connect Manually
If your home WiFi router does not have a WPS button, you can connect manually. Navigate to the main menu by
pressing the following key sequences:
Home
→
Settings
→
Network
→
WiFi
→
Select to enable.
Once WiFi has been enabled, using the remote scroll down and select the required network and press OK. When
prompted, enter your WiFi password using the remote. Alternately a USB keyboard may be plugged into the USB
port of the Set-Top Box. Type password on keyboard as required.
Ensure that WiFi network signal strength is strong or very strong .