User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699

Data displayed on "Read a tag"

There are also 4 folder tabs displayed. The folder tabs represent the various areas inside the tag that are

programmable either by the Factory or by the Agency. If a Supervisor can modify a tag field it is displayed as a

selection box (white background areas in the screen).

The fixed Factory data fields and the variable Agency data fields from the Factory/Agency folder tab are

displayed by default.

To display the value read in the interactive Agency (Custom) 31 bit data field, click on the Agency (Custom)

folder tab.

There would be selection boxes

shown here only if a Supervisor

created and saved a new

template.

Refer to the section "Create a

new Template file".

The selection boxes shown here

allow the template data to be

modified.

The Supervisor may change the

default folder tab displayed upon

reading a tag. Refer to the section

in the manual titled "Default View

Page."

The number of blue squares

displayed in the "progress bar"

indicates the relative completion

of the Read or Program task.

"Clear Unassigned Bits", when selected, will set all the unused bits in the entire field to zero.

Note 1. If a template file is not loaded then the "Clear Unassigned Bits" default value is

"unselected". Reason: all IAG tags have these 31 bits set when they were originally

programmed at the factory.

Note 2. If a template file is loaded then this "Clear Unassigned Bits" value is set to the data that

was stored in that template file.