User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699

4.4.2 Load an IAG template (for programming an IAG tag)

(You should read and be familiar with the previous section in the manual.) All users must verify the

current template displayed when programming a tag or a batch of tags. (The template is also known as the tag

configuration data file.) If the current template data is incorrect then the user must load the correct template. If

the correct template does not exist in the list of template files (see below) then the Supervisor must create it.

• Select the main menu item "User" then Click on the "Load Template" sub-menu item.

• The following dialog box appears (example).

• Choose the appropriate template file by selecting it with the mouse

then clicking on the "Open" button.

• Verify that this is the correct template; select the Factory/Agency folder

tab and then examine all of the selection boxes displayed.

continued…

Template files are created and stored in a

separate directory as specified by a

Supervisor (default is c:\TagTemplates\*.*).

If the required template does not exist then

only a Supervisor may create a new template.

Possible error message may be "Unable to

load template file" if the directory was emptied

or if the files have been moved.

After verifying that the fixed

Agency fields are correct you

must then verify that the field

having 31 bits of custom Agency

Data is set to the desired value.

Click on Agency Custom folder

tab to view the current value set

for this field (see below).

The selection boxes shown here

allow the template data to be

modified by a Supervisor. The

presence of a Template File name

(at bottom left) indicates that the

data displayed came from that

template file.