User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699

4.5.2 Load a Type 2 LCD template (for programming a Type 2 LCD tag)

(You should read and be familiar with the previous section in the manual.) All users must verify the

current template displayed when programming a tag or a batch of tags. (The template is also known as the tag

configuration data file.) If the current template data is incorrect then the user must load the correct template.

• Select the main menu item "User" then Click on the "Load Template" sub-menu item.

• The following dialog box appears (example).

• Choose the appropriate template file by selecting it with the mouse then clicking on the "Open" button.

• Verify that this is the correct template; select each folder tab in turn and then examine all of the selection

boxes displayed.

Note: The Vehicle Reference field value (shown as "72" in the example above) represents the cumulative total

of the first 4 field values assigned as "vehicle" data.

continued…

Template files are created

and stored in a separate

directory as specified by a

Supervisor (example

directory at left is

"TagTemplates").

If the required template

does not exist then only a

Supervisor may create a

new template.

Possible error message

may be "Unable to load

template file" if the

directory was emptied

or if the files have been

moved.

After verifying that the

variable Agency fields

are correct you must

then verify that the

field having 7 bits of

custom Agency Data

is set to the desired

value. Click on

Agency Custom folder

tab to view the current

value set for this field

(see below).