User's Manual
USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699
©1999-2008 MARK IV INDUSTRIES CORP. I.V.H.S. DIVISION pg. 34 of 69
continued…
• After verifying that the seven fixed Agency fields are correct you must then verify that the 7 bits of custom
Agency Data are set to the desired value.
• Click on the Agency (Custom) folder tab to view the current value set for this field.
• After verifying that the Agency (Custom) Data are correct you must then verify that the Scratch Pad Data
are set to the desired value.
• Click on the Scratch Pad folder tab to view the current value set for this field.
• After verifying that the Scratch Pad Data are correct you must then verify that the 4 bits of custom Scratch
Pad Data are set to the desired value.
• Click on the Scratch Pad Custom folder tab to view the current value set for this field.
The default value is 7 zeros (as shown).
This portion of the Template file is created
and stored in a separate directory as
specified by a Supervisor.
If the required agency custom data file
does not exist then only a Supervisor may
design a new agency custom data file.
"Clear Unassigned Bits", when selected, will set all the
unused bits in the entire field to zero.
"Clear <specified>
Data", when selected,
will set all the bits in the
<specified> set of fields
to zero.
The default value is 4 zeros (as shown).
This portion of the Template file is
created and stored in a separate
directory as specified by a Supervisor.
If the required scratch pad custom data
file does not exist then only a Supervisor
may design a new scratch pad custom
data file.
The selected or unselected
state is set by the template file
data that was saved when the
template was created.