User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699

5.5.2 Set Agency ID

This is the Agency name displayed in the "title box" in the program banner area.

5.5.3 Set Communications port parameters

These are the program parameters set at the PC port and then used in communication with the TPU.

Type the name of the Agency ID.

When completed, click on "Apply" to accept the

displayed settings. Click on "OK" to exit from this

menu. The name (as shown in the example at

left) will appear at the upper left corner of the

main screen as shown in the example below.

The Com Port parameter default is set at COM1. If your

computer has a serial port mouse connected at COM1 you

must change this parameter to COM2 (or whatever external

port is available for serial comms use).

Note:

The remaining parameters have defaults as shown.

Do not change these remaining parameters unless you get

authorization in writing from MARK IV INDUSTRIES LTD,

for example in a software update instruction. Only at that

time, to change these remaining parameters, then type the

new values, then click on "Apply" to accept the displayed

settings. Click on "OK" to exit from this menu.