User's Manual

USER MANUAL: T500 Tag Programming Station (TPS) Document A316000-699
©1999-2008 MARK IV INDUSTRIES CORP. I.V.H.S. DIVISION pg. 50 of 69
5.5.4 Set Automation parameters (for tag programming)
These are the menu options provided to execute automatically when the AU drawer is closed.
The" Auto Write Enabled" banner is a
warning that, when the AU drawer is closed, the tag will be
programmed with whatever data is currently displayed on screen. The banner appears as follows…
Enable Automatic Read provides automatic tag reading
whenever the AU drawer is closed (otherwise a "manual
read" from the main menu tool bar is required).
Enable Automatic Write provides automatic tag
programming whenever the AU drawer is closed
(otherwise a "manual program" from the main menu tool
bar is required). The "Auto Write Enabled" banner is
displayed onscreen if this option is enabled (refer to the
screen displayed below).
IMPORTANT…
The "Apply" button will be highlighted after changing the previously
selected option(s). To assert (use) the change(s) you must click on the
"Apply" button before clicking the "OK" button.