Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 106 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Toll Rate / Balance adjustment tab
Toll
Rate/Balance
adjustment
From the Tag Programming tab
on the Configuration page:
with OBU Feedback disabled,
select the Toll Rate/Balance
adjustment check box.
anyone
rw_TRB
0 (Disabled)
0 (Disabled)
1 (Enabled)
Disabled: Reader does not
adjust Toll Rate or Balance
Enabled: Reader is
responsible for adjusting
Toll Rate and Balance in
OBU.
to allow the
Toll/Rate
Balance
adjustment to be
made by the
Reader and
access
configuration
settings
TRBA BAT
Processing
Type
From the Toll Rate/Balance tab
on the Configuration page:
with Toll Rate/Balance
adjustment enabled, select
BAT 1-Fixed Toll or BAT 2-
Variable Toll, then,
click the Update TRBA
Configuration button
anyone
TRBTYP
0 (BAT 1-
Fixed Toll)
0 (BAT 1-Fixed
Toll)
1 (BAT 2-
Variable Toll)
BAT 1-Fixed Toll: the Reader
charges a toll based on
the RF Channel(i.e. lane)
and type of vehicle
BAT 2 –Variablt Toll: the
Reader charges a toll
based on whether the
Reader is at an entry or
exit
to enable either
fixed toll or
variable toll
charges and
provide access to
related toll
options