Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 107 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Toll Rate Table
Select
From the Toll Rate/Balance tab
on the Configuration page:
with BAT 1 enabled, select one
of four toll rates from the Toll
Rate Table Select drop-down
box for each RF channel
click the Update TRBA
Configuration button
anyone
TRBATS
0 (Table 1)
0 (Table 1)
1 (Table 2)
2 (Table 3)
3 (Table 4)
sets the toll rate for each RF
Channel based on the
table selected
to allow a
Reader to charge
different rates,
depending on
which lane a
vehicle is in
Entry/Exit
Reader
From the Toll Rate/Balance tab
on the Configuration page:
with BAT 2 enabled, select
Entry Reader or Exit Reader
click the Update TRBA
Configuration button
anyone
TRBAER
0 (Entry
Reader)
0 (Entry
Reader)
1 (Exit Reader)
Entry Reader: This Reader
location is used as the
highway entry point when
calculating the toll
Exit Reader: This Reader
location is used as the
highway exit point when
calculating the toll
to allow a
Reader to charge
a different rate
on entry and exit
Enforce
Adjustment ID
Checking
From the Toll Rate/Balance tab
on the Configuration page:
select the Enforce Adjustment
ID Checking check box
click the Update TRBA
Configuration button
anyone
TRBEAI
0 (Disabled)
0 (Disabled)
1 (Enabled)
Disabled: no limits on
how often Reader can
update OBU balance
Enabled: limits how often
Reader can update OBU
balance
to set limits on
how frequently
the balance
stored in a
toll/balance OBU
can be updated.