Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 115 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Voting Time (all
other tag
types) [ms]
From the Channel tab on the
Configuration page:
Type the Voting Time for all
other tag types in the
appropriate fields.
user with
Advanced
User
permissions
VOTETO
100
0-9999
Specify the time after the
initial entry of the
transponder into the
capture zone, subject to
the Programming
Timeout parameter.
Used by all
protocols
Dynamic Voting
Control
From the Channel tab on the
Configuration page:
Select Disabled or Reader from
the Dynamic voting control
drop-down box (LC Speed
and LC Ends are not
supported), then, press Enter
or select a different tab.
user with
Advanced
User
permissions
DVCTRL
0 (Disabled)
0 (Disabled)
1 (Reader)
2 (LC Speed)
3 (LC End)
Disabled: no voting
control
Reader: the Reader
monitors the average
time an OBU is in the
capture zone and uses
this time to determine
an appropriate voting
time
LC Speed: not currently
supported
LC End: not currently
supported
to set type of
voting control