Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 118 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Use RFP-
Compliant
Message
Format
From the LC tab on the
Configuration page:
Select the Use RFP-Compliant
Message Format check box,
then, press Enter or select a
different tab..
user with
Advanced
User
permissions
RfpMsg
0 (Disabled)
0 (Disabled)
1 (Enabled)
enables the RFP-
compliant message
format
allows the
Reader to report
transactions to
the LC in the
new E-ZPass-
specified format
LC Ethernet
TCP-Socket
Timeout
From the LC tab on the
Configuration page:
With at least one RF Channel
configured to send data to the
LC via Ethernet, type a time, in
milliseconds, in the LC Ethernet
TCP-Socket Timeout check box,
then, press Enter or select a
different tab..
user with
Advanced
User
permissions
LcEtTo
500
100-5000
sets the timeout for a
response from the LC via
the LC Ethernet network
to determine if
there is an
Ethernet
communication
problem
between the
Reader and the
LC
Send Heartbeat
Messages
From the LC tab on the
Configuration page:
Select the Send Heartbeat
Messages check box, then,
press Enter or select a different
tab..
anyone
LCHTBT
1 (Enabled)
0 (Disabled)
1 (Enabled)
Disabled: No heartbeat
messages are sent to LC.
Enabled: causes the
Reader to send heartbeat
messages to the LC via
serial link
to detect
communication
problems
between the
Reader and the
LC in the
absence of OBU
data