Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 121 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Data Bits
From the Serial tab on the
Configuration page:
With the Serial Port State
enabled, select the desired
Data Bits from the drop-down
box, then, press Enter or select
a different tab.
anyone
COMBTZ
3 (8)
0 (5)
1 (6)
2 (7)
3 (8)
sets the LPM data bits for
individual COM ports
to configure the
LPM data bits on
a port by port
basis
Parity
From the Serial tab on the
Configuration page:
With the Serial Port State
enabled, select the desired
Parity from the drop-down
box, then, press Enter or select
a different tab.
anyone
COMPTY
0 (None)
0 (None)
1 (Even)
2 (Odd)
sets the LPM parity for
individual COM ports
to configure the
LPM parity on a
port by port
basis
Stop Bits
From the Serial tab on the
Configuration page:
With the Serial Port State
enabled, select the desired
Stop Bits from the drop-down
box, then, press Enter or select
a different tab.
anyone
COMSTP
1
1-2
sets the LPM stop bits for
individual COM ports
to configure the
LPM stop bits on
a port by port
basis