Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 122 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Transponder
Timeout
From the Group tab on the
Configuration page:
Enter a time, in seconds, in the
Transponder Timeout field,
then, press Enter or select a
different tab.
anyone
GRPTTO
300
1-300
set the transponder
timeout time
to set the
amount of time
an OBU must be
out of a capture
zone before
communication
with the OBU is
reported as a
new transaction
Save Config
From the Manage Config tab
on the Configuration page:
Click the Save Config button.
anyone
N/A
N/A
N/A
in IE, displays
configuration file
in Firefox, opens a file
management box
to allow Reader
configuration file
to be saved. The
file can then be
reloaded later or
used to
configure other
Readers
Browse
(select
configuration
file to upload)
From the Manage Config tab
on the Configuration page:
Click the Browse button.
anyone
N/A
N/A
N/A
opens the File Upload
window
to select a saved
configuration file
to upload