Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 123 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
Upload Config
(without
changing IP
addresses)
From the Manage Config tab
on the Configuration page:
With the correct configuration
file displayed in the Filename
field above, click the upper
Upload Config button.
anyone
N/A
N/A
N/A
uploads the selected
configuration file to the
Reader without
overwriting the IP
addresses
to upload a
saved Reader
configuration
without
changing the IP
address settings
Upload Config
(including the IP
addresses)
From the Manage Config tab
on the Configuration page:
With the correct configuration
file displayed in the Filename
field above, click the bottom
Upload Config button.
anyone
N/A
N/A
N/A
uploads the selected
configuration file to the
Reader including any IP
addresses
to upload a
saved Reader
configuration
Reset
Parameters to
Default Values
From the Manage Config tab
on the Configuration page:
Click the bottom Reset
Parameters to Default Values
button.
anyone
N/A
N/A
N/A
restores all Reader
configuration settings to
the factory default values
except for the IP address
to reset the
Reader
configuration,
usually while
performing
specific field
service tests
Browse
(select Reader
Firmware to
upload)
From the Manage Config tab
on the Configuration page:
Click the Browse button.
anyone
N/A
N/A
N/A
opens the File Upload
window
to select a saved
configuration file
to upload