Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Operating Instructions
Confidential UM 360463-202: A12 (Draft) Page 127 of 291
© Kapsch TrafficCom Canada Inc. 2014
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose
intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Command
How is this command
executed?
Who can
execute this
command?
Parameter
Name
Default
Parameter
Value
Parameter
Range/Options
What does this
command do?
What is the
purpose of this
command?
NTP Server 1, 2
and 3
From the Time Management
page:
enter three different valid NTP
server IP address in the NTP
Server fields, then,
Click the Update NTP Settings
button.
user with
Advanced
User
permissions
NTP__1
NTP__2
NTP__3
N/A
N/A
sets the NTP server IP
addresses
to provide the
Reader with
three NTP
servers it can
access to
accurately
maintain time
with other
Readers in an IR
network
Time Zone
From the Time Management
page:
select the appropriate time
zone from the Time Zone drop
down box, then,
click the Set Time button.
anyone
TMZONE
2 (NewYork)
0 (UTC)
1 (Toronto)
2 (New York)
3 (Halifax)
4 (Chicago)
Adjust the time sent from
the NTP server to the local
time zone
to ensure that
the time
provided by the
NTP server is
displayed as the
local time
Set Time
From the Time Management
page:
enter the date and time in the
format
MMDDYY<sp>HHMMSS, then,
Click the Set Time button.
anyone
N/A
N/A
N/A
manually sets the Reader
time
to manually set
the time on a
Reader not in an
IR network