Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential UM 360463-202: A12 (Draft) Page 147 of 291
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Figure 5-2 AC Mains
6 ft. power cord
PSM
primary
Reader enclosure
PSM
secondary
POWER
MAINS
6 ft. power cord
duplex receptacle
supplied by system
integrator
Power mains and
cable to Reader
enclosure supplied by
system integrator
lightning surge
suppressor supplied
by system integrator
Earth ground system as per
“NEC grounding electrode”
MPR2
Connect the appropriate cables from the Reader to the LC as shown in Figure 5-3 on page 148.