Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

161

162

163

164

165

166

167

168

169

170

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360463-202: A12 (Draft) Page 161 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

3. Select Sync to Every Superframe in the Superframe Sync Skip row.

4. Select No in the Add 2 Dummy Frames row.

5. Select JANUS from the drop-down box in the Type of Reader Synching To row.

6. Repeat these steps for all Readers in the Synchronization circuit.

7. When you are finished, press Enter to accept the selections.

Synchronization between JANUS® Readers and BADGER Readers

JANUS

and BADGER Readers in the same synchronization network can be configured as in step 1 in the

procedure Synchronization between MPR2 Readers. However, JANUS

and BADGER Readers can also have the

superframe configurations shown in Table 5-3 on page 164.