Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential UM 360463-202: A12 (Draft) Page 197 of 291
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Troubleshooting tree: MRFM-S not working
START
Symptom:
MRFM-S LED is OFF
MRFM-S
DATA LED
OFF?
Contact Kapsch Service for
assistance
Replace the MRFM-S
CTM ACTIVE
LED ON?
MRFM-S
DATA LED solid
green?
 Verify antenna is
undamaged.
 Verify all cable connections
from antenna to RF
module.
 Verify RF channels are set
to Active.
Perform Sync
Troubleshooting
No
YesNo
Yes
Yes
No
Replace the CTM
Yes
No
MRFM-S is
functional
MRFM-S DATA
LED solid green?
MRFM-S is
functional