Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

211

212

213

214

215

216

217

218

219

220

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360463-202: A12 (Draft) Page 216 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

5. Set the RF State of the Offline MRFM-S channels back to Active.

6. Press Enter or select a different tab.

7. Verify the DATA LED illuminates solid green.

Note: If the DATA LED does not illuminate solid green, see Troubleshooting tree: MRFM-S not working,

page 197.

8. Verify module output power and power at antenna using a commercial off-the shelf spectrum analyzer

9. Ensure the RF channel is capturing OBU data (see Troubleshooting tree: MRFM-S not working page

197).

Antenna replacement

Note: The Reader does not need shutting down to replace an antenna.