Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

221

222

223

224

225

226

227

228

229

230

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360463-202: A12 (Draft) Page 224 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

5. Set the Offline MRFM-S RF State back to Active.

6. Press Enter.

7. Verify that the DATA LED illuminates solid green.

8. Verify module output powers and power at antenna using a commercial off-the shelf spectrum analyzer.

9. Ensure the MRFM-S is capturing OBU data (see Monitoring OBU transactions as they occur via the

Diagnostics page, page 58).

CTM replacement

WARNING:

THE MODULES MAY HAVE SHARP EDGES. HANDLE THE MODULES

CAREFULLY. WHENEVER POSSIBLE, USE A MODULE EXTRACTION

TOOL TO REMOVE A MODULE.