Operations and Maintenance Manual

ManualsBrandsKAPSCH TRAFFICCOM CANADA ManualsElectronicsNon-multilateration LMS transmitter and receiver

231

232

233

234

235

236

237

238

239

240

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential UM 360463-202: A12 (Draft) Page 234 of 291

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24

Kapsch TrafficCom

3. Ensure that LC communications is configured, that is, the appropriate Ethernet and Serial selections are

made in the Destinations field.

4. Select the Send Heartbeat messages check box to enable sending heartbeat messaging, as required.

5. Enter a time, in seconds, in the Heartbeat Interval field. This number must be lower than the LC

communication error threshold.

6. Click the General tab.

Result: The following screen appears.