Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential UM 360463-202: A12 (Draft) Page 236 of 291
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
To configure the Reader to switch over when the Ethernet IR link is down
Prerequisites: Multiple Reader communication method set to Ethernet in the Lane Assignment tab
of the Configuration page.
1. Select the Configuration link on the left side panel.
2. Click the General tab.
Result: The following screen appears.
1. Select the Switchover on Ethernet IRIF Link Down check box.
2. From the Lane assignment tab on the Configuration page, enter an IRIF timeout, in milliseconds, in
the IRIF text box.
Result: The Reader now continuously checks the IRIF link and switches over whenever a downed
Ethernet IRIF link is detected.
To configure the Reader to switchover based on Test tag feedback (if present)
Note: Test tags are used to continuously check and confirm the operation of the antennas.