Operations and Maintenance Manual

_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential UM 360463-202: A12 (Draft) Page 243 of 291
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: MPR2_OPERATIONS_AND_MAINTENANCE-MANUAL_REV A12.DOCX 05/08/2014 11:24
Kapsch TrafficCom
Saving the Reader configuration
Each CTM has a unique configuration file stored on its CFM. This configuration file can be downloaded
and saved to a computer. Use a saved configuration file to do the following.
 Quickly configure another Reader requiring the same or similar configuration.
 Restore the Reader to a known configuration.
 Troubleshoot problems by comparing the current configuration to past configurations.
This procedure outlines the steps for saving the Reader configuration to a service laptop which is
logged into a CTM.
Prerequisites: A service laptop connected to Ethernet 1 or a USB port of the CTM and accessing the
CTM web interface. Refer to Connecting a service laptop to the Reader, page 40.
1. Click the Configuration link on the left side panel.
Result: The following screen appears.
1. Click the Manage Config tab on the Configuration page.
Result: The following screen appears.